计算任务脚本安装方式(64位)

版主: 论坛版主

rickychaw
新人报道
帖子: 7
注册时间: 28 11月 2018, 14:39

Re: 计算任务脚本安装方式(64位)

帖子 rickychaw » 29 4月 2019, 21:49

图片

请问这个是正常的情况吗?不显示存储了

tzwlwm
新人报道
帖子: 1
注册时间: 12 6月 2019, 13:01

Re: 计算任务脚本安装方式(64位)

帖子 tzwlwm » 12 6月 2019, 13:06

* INFO: Running install_ubuntu_stable_post()
* INFO: Running install_ubuntu_check_services()
* INFO: Running install_ubuntu_restart_daemons()
* INFO: Running daemons_running()
* INFO: Salt installed!
install.sh: line 642: [[: [2019-06-12 04:11:29] [info] verifty file over
0: syntax error: operand expected (error token is "[2019-06-12 04:11:29] [info] verifty file over
0")
[2019-06-12 04:11:29] [info] All install over

pine64用64位的计算任务脚本安装,出现如上错误提示。

火山海客
新人报道
帖子: 7
注册时间: 03 11月 2018, 18:21

Re: 计算任务脚本安装方式(64位)

帖子 火山海客 » 13 6月 2019, 22:07

数码视讯Q5用装新的脚本安装,网络和计算任务都不工作,之前的版本网络任务工作,计算任务不工作。
login as: root
root@192.168.99.135's password:
____ ___
/ ___|/ _ \__ ____ ____ __
\___ \ (_) \ \/ /\ \/ /\ \/ /
___) \__, |> < > < > <
|____/ /_//_/\_\/_/\_\/_/\_\


Welcome to ARMBIAN 5.44 user-built Ubuntu 18.04.1 LTS 3.14.29
System load: 1.01 0.61 0.26 Up time: 3 min
Memory usage: 11 % of 775MB IP: 192.168.99.135
Usage of /: 12% of 7.0G

[ General system configuration (beta): armbian-config ]

Last login: Wed Jun 12 23:48:07 2019 from 192.168.99.183

root@aml:~# wget https://raw.githubusercontent.com/qingh ... install.sh -O install.sh&&sudo bash install.sh
--2019-06-12 23:49:03-- https://raw.githubusercontent.com/qingh ... install.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 22312 (22K) [text/plain]
Saving to: ‘install.sh’

install.sh 100%[===================>] 21.79K 31.5KB/s in 0.7s

2019-06-12 23:49:04 (31.5 KB/s) - ‘install.sh’ saved [22312/22312]

Device "eth0
eth0" does not exist.

Reading package lists... Done
Building dependency tree
Reading state information... Done
curl is already the newest version (7.58.0-2ubuntu3.2).
wget is already the newest version (1.19.4-1ubuntu2.1).
apt-transport-https is already the newest version (1.6.3).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
tmp/screenfetch 100%[===================>] 232.28K 70.3KB/s in 3.3s
2019-06-12 23:49:23 URL:https://raw.githubusercontent.com/Kitty ... nfetch-dev [237855/237855] -> "tmp/screenfetch" [1]
[2019-06-12 23:49:24] [info] system : ubuntu ;Package manager apt
[2019-06-12 23:49:24] [info] docker not found
[2019-06-12 23:49:24] [info] docker was found! skiped
[2019-06-12 23:49:24] [info] k8s not found
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1326 100 1326 0 0 3374 0 --:--:-- --:--:-- --:--:-- 3365
OK
deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
[2019-06-12 23:49:31] [info] installing k8s
Get:1 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial InRelease [8,993 B]
Hit:3 http://ports.ubuntu.com bionic InRelease
Ign:4 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main arm64 Packages
Ign:5 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main armhf Packages
Get:6 http://ports.ubuntu.com bionic-security InRelease [88.7 kB]
Get:4 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main arm64 Packages [25.3 kB]
Get:5 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main armhf Packages [25.3 kB]

Fetched 5,743 kB in 4s (1,282 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
198 packages can be upgraded. Run 'apt list --upgradable' to see them.
kubelet was already not hold.
kubeadm was already not hold.
kubectl was already not hold.
kubernetes-cni was already not hold.
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
cri-tools ebtables socat
The following NEW packages will be installed:
cri-tools ebtables kubeadm kubectl kubelet kubernetes-cni socat
0 upgraded, 7 newly installed, 0 to remove and 198 not upgraded.
Need to get 50.1 MB of archives.
After this operation, 359 MB of additional disk space will be used.
Get:1 http://ports.ubuntu.com bionic-updates/main arm64 ebtables arm64 2.0.10.4-3.5ubuntu2.18.04.3 [74.2 kB]
Get:2 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main arm64 cri-tools arm64 1.12.0-00 [4,806 kB]
Fetched 50.1 MB in 12s (4,162 kB/s)
Selecting previously unselected package cri-tools.
(Reading database ... 30773 files and directories currently installed.)
Preparing to unpack .../0-cri-tools_1.12.0-00_arm64.deb ...
Unpacking cri-tools (1.12.0-00) ...

Processing triggers for systemd (237-3ubuntu10.3) ...
Setting up ebtables (2.0.10.4-3.5ubuntu2.18.04.3) ...
Created symlink /etc/systemd/system/multi-user.target.wants/ebtables.service → /lib/systemd/system/ebtables.service.
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Setting up kubectl (1.12.3-00) ...
Processing triggers for man-db (2.8.3-2) ...
Setting up kubelet (1.12.3-00) ...
Created symlink /etc/systemd/system/multi-user.target.wants/kubelet.service → /lib/systemd/system/kubelet.service.
Setting up kubeadm (1.12.3-00) ...
Processing triggers for systemd (237-3ubuntu10.3) ...
kubelet set on hold.
kubeadm set on hold.
kubectl set on hold.
kubernetes-cni set on hold.
[2019-06-12 23:51:26] [info] kubeadm version ok
[2019-06-12 23:51:26] [info] kubelet version ok
[2019-06-12 23:51:26] [info] kubectl version ok
[2019-06-12 23:51:26] [info] docker not found
[2019-06-12 23:51:26] [info] docker was found! skiped
install.sh: line 268: docker: command not found
install.sh: line 269: docker: command not found
install.sh: line 270: docker: command not found
install.sh: line 271: docker: command not found
modprobe: FATAL: Module br_netfilter not found in directory /lib/modules/3.14.29
vm.swappiness = 0
net.ipv6.conf.default.forwarding = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.tcp_congestion_control = bbr
net.ipv4.ip_forward = 1
[2019-06-12 23:51:26] [info] k8s install over
2019-06-12 23:51:27 URL:https://raw.githubusercontent.com/Bonus ... t.conflist [427/427] -> "/opt/bcloud/compute/10-mynet.conflist" [1]
2019-06-12 23:51:28 URL:https://raw.githubusercontent.com/Bonus ... pback.conf [54/54] -> "/opt/bcloud/compute/99-loopback.conf" [1]
2019-06-12 23:51:29 URL:https://raw.githubusercontent.com/Bonus ... s/info.txt [238/238] -> "tmp/info.txt" [1]
2019-06-12 23:51:54 URL:https://raw.githubusercontent.com/Bonus ... de_aarch64 [16049533/16049533] -> "tmp/bxc-node_aarch64" [1]
[2019-06-12 23:51:54] [info] tmp/bxc-node_aarch64 download success.
Failed to enable unit: File bxc-node.service: Invalid argument
Failed to start bxc-node.service: Unit bxc-node.service is not loaded properly: Invalid argument.
See system logs and 'systemctl status bxc-node.service' for details.
curl: (7) Failed to connect to localhost port 9017: Connection refused
[2019-06-12 23:51:56] [error] node start faild, rollback and restart
Failed to restart bxc-node.service: Unit bxc-node.service is not loaded properly: Invalid argument.
See system logs and 'systemctl status bxc-node.service' for details.
Would you like to install salt-minion for remote debugging by developers?
If not, the program has problems, you need to solve all the problems you encounter
您是否愿意安装salt-minion ,供开发人员远程调试.
如果否,程序出了问题,您需要自己解决所有遇到的问题,默认YES
[Default YES/N]:y
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 264 100 264 0 0 186 0 0:00:01 0:00:01 --:--:-- 186
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0 * INFO: Running version: 2019.05.20
* INFO: Executed by: shell pipe
* INFO: Command line: 'bash stable 2019.2.0'

* INFO: System Information:
* INFO: CPU: AArch64
* INFO: CPU Arch: aarch64
* INFO: OS Name: Linux
* INFO: OS Version: 3.14.29
* INFO: Distribution: Ubuntu 18.04

* INFO: Installing minion
100 260k 100 260k 0 0 79790 0 0:00:03 0:00:03 --:--:-- 152k
* INFO: Found function install_ubuntu_stable_deps
* INFO: Found function config_salt
* INFO: Found function preseed_master
* INFO: Found function install_ubuntu_stable
* INFO: Found function install_ubuntu_stable_post
* INFO: Found function install_ubuntu_restart_daemons
* INFO: Found function daemons_running
* INFO: Found function install_ubuntu_check_services
* INFO: Running install_ubuntu_stable_deps()
Hit:1 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial InRelease
Hit:2 http://ports.ubuntu.com bionic InRelease
Hit:4 http://ports.ubuntu.com bionic-security InRelease
Hit:5 http://ports.ubuntu.com bionic-updates InRelease
Hit:6 http://ports.ubuntu.com bionic-backports InRelease
Hit:3 https://apt.armbian.com bionic InRelease
Reading package lists...
* WARN: Support for arm64 packages is experimental and might rely on architecture-independent packages from the amd64 repository.
Reading package lists...
Building dependency tree...
Reading state information...
ca-certificates is already the newest version (20180409).
The following additional packages will be installed:
gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf
gpgsm gpgv
Suggested packages:
dbus-user-session pinentry-gnome3 tor parcimonie xloadimage scdaemon
The following packages will be upgraded:
apt-transport-https dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent
gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv
12 upgraded, 0 newly installed, 0 to remove and 190 not upgraded.
Need to get 1,876 kB of archives.
After this operation, 15.4 kB of additional disk space will be used.
Get:1 http://ports.ubuntu.com bionic-security/main arm64 gpg-wks-client arm64 2.2.4-1ubuntu1.2 [76.8 kB]
Get:2 http://ports.ubuntu.com bionic-security/main arm64 dirmngr arm64 2.2.4-1ubuntu1.2 [276 kB]
Get:3 http://ports.ubuntu.com bionic-security/main arm64 gpg arm64 2.2.4-1ubuntu1.2 [400 kB]
Get:4 http://ports.ubuntu.com bionic-security/main arm64 gnupg-utils arm64 2.2.4-1ubuntu1.2 [108 kB]
Get:5 http://ports.ubuntu.com bionic-security/main arm64 gnupg-l10n all 2.2.4-1ubuntu1.2 [49.6 kB]
Get:6 http://ports.ubuntu.com bionic-security/main arm64 gpg-agent arm64 2.2.4-1ubuntu1.2 [190 kB]
Get:7 http://ports.ubuntu.com bionic-security/main arm64 gpgsm arm64 2.2.4-1ubuntu1.2 [182 kB]
Get:8 http://ports.ubuntu.com bionic-security/main arm64 gpgconf arm64 2.2.4-1ubuntu1.2 [106 kB]
Get:9 http://ports.ubuntu.com bionic-security/main arm64 gnupg arm64 2.2.4-1ubuntu1.2 [249 kB]
Get:10 http://ports.ubuntu.com bionic-security/main arm64 gpg-wks-server arm64 2.2.4-1ubuntu1.2 [71.6 kB]
Get:11 http://ports.ubuntu.com bionic-security/main arm64 gpgv arm64 2.2.4-1ubuntu1.2 [166 kB]
Get:12 http://ports.ubuntu.com bionic-updates/universe arm64 apt-transport-https all 1.6.11 [1,692 B]
Fetched 1,876 kB in 3s (669 kB/s)
(Reading database ... 30871 files and directories currently installed.)
Preparing to unpack .../00-gpg-wks-client_2.2.4-1ubuntu1.2_arm64.deb ...
Unpacking gpg-wks-client (2.2.4-1ubuntu1.2) over (2.2.4-1ubuntu1.1) ...
Preparing to unpack .../01-dirmngr_2.2.4-1ubuntu1.2_arm64.deb ...
Unpacking dirmngr (2.2.4-1ubuntu1.2) over (2.2.4-1ubuntu1.1) ...
Preparing to unpack .../02-gpg_2.2.4-1ubuntu1.2_arm64.deb ...
Unpacking gpg (2.2.4-1ubuntu1.2) over (2.2.4-1ubuntu1.1) ...
Preparing to unpack .../03-gnupg-utils_2.2.4-1ubuntu1.2_arm64.deb ...
Unpacking gnupg-utils (2.2.4-1ubuntu1.2) over (2.2.4-1ubuntu1.1) ...
Preparing to unpack .../04-gnupg-l10n_2.2.4-1ubuntu1.2_all.deb ...
Unpacking gnupg-l10n (2.2.4-1ubuntu1.2) over (2.2.4-1ubuntu1.1) ...

Setting up gpg-wks-server (2.2.4-1ubuntu1.2) ...
Setting up gpg-wks-client (2.2.4-1ubuntu1.2) ...
Setting up gnupg (2.2.4-1ubuntu1.2) ...
Warning: apt-key output should not be parsed (stdout is not a terminal)
OK
Hit:1 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial InRelease
Hit:2 http://ports.ubuntu.com bionic InRelease
Hit:4 http://ports.ubuntu.com bionic-security InRelease
Hit:5 http://ports.ubuntu.com bionic-updates InRelease
Hit:6 http://ports.ubuntu.com bionic-backports InRelease
Get:7 https://repo.saltstack.com/apt/ubuntu/1 ... e/2019.2.0 bionic InRelease [2,126 B]
Hit:3 https://apt.armbian.com bionic InRelease
Get:8 https://repo.saltstack.com/apt/ubuntu/1 ... e/2019.2.0 bionic/main amd64 Packages [3,344 B]
Fetched 5,470 B in 2s (2,208 B/s)
Reading package lists...
Hit:1 https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial InRelease
Hit:3 http://ports.ubuntu.com bionic InRelease
Hit:4 http://ports.ubuntu.com bionic-security InRelease
Hit:5 http://ports.ubuntu.com bionic-updates InRelease
Hit:6 https://repo.saltstack.com/apt/ubuntu/1 ... e/2019.2.0 bionic InRelease
Hit:7 http://ports.ubuntu.com bionic-backports InRelease
Hit:2 https://apt.armbian.com bionic InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
procps is already the newest version (2:3.3.12-3ubuntu1.1).
The following additional packages will be installed:
libapt-inst2.0 libapt-pkg5.0 libpci3 libpython-stdlib libpython2.7-minimal
libpython2.7-stdlib python python-certifi python-chardet python-idna
python-minimal python-pkg-resources python-six python-urllib3
python2.7-minimal
Suggested packages:
python-doc python-tk python-apt-dbg python-apt-doc python-setuptools
python-cryptography python-openssl python-socks python-ntlm python2.7-doc
binfmt-support
Recommended packages:
apt python-cryptography python-ipaddress python-openssl
The following NEW packages will be installed:
libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-apt
python-certifi python-chardet python-idna python-minimal
python-pkg-resources python-requests python-six python-urllib3 python-yaml
python2.7 python2.7-minimal
The following packages will be upgraded:
libapt-inst2.0 libapt-pkg5.0 libpci3 pciutils
4 upgraded, 16 newly installed, 0 to remove and 186 not upgraded.
Need to get 5,625 kB of archives.
After this operation, 19.9 MB of additional disk space will be used.
Get:1 http://ports.ubuntu.com bionic-updates/main arm64 libpython2.7-minimal arm64 2.7.15-4ubuntu4~18.04 [335 kB]
Get:2 http://ports.ubuntu.com bionic-updates/main arm64 python2.7-minimal arm64 2.7.15-4ubuntu4~18.04 [1,142 kB]
Get:3 http://ports.ubuntu.com bionic/main arm64 python-minimal arm64 2.7.15~rc1-1 [28.1 kB]
Get:4 http://ports.ubuntu.com bionic-updates/main arm64 libpython2.7-stdlib arm64 2.7.15-4ubuntu4~18.04 [1,853 kB]
Get:5 http://ports.ubuntu.com bionic-updates/main arm64 python2.7 arm64 2.7.15-4ubuntu4~18.04 [239 kB]
Get:6 http://ports.ubuntu.com bionic/main arm64 libpython-stdlib arm64 2.7.15~rc1-1 [7,620 B]
Get:7 http://ports.ubuntu.com bionic/main arm64 python arm64 2.7.15~rc1-1 [140
Get:17 http://ports.ubuntu.com bionic/main arm64 python-six all 1.11.0-2 [11.3 kB]
Get:18 http://ports.ubuntu.com bionic-security/main arm64 python-urllib3 all 1.22-1ubuntu0.18.04.1 [85.9 kB]
Get:19 http://ports.ubuntu.com bionic-security/main arm64 python-requests all 2.18.4-2ubuntu0.1 [58.5 kB]
Get:20 http://ports.ubuntu.com bionic/main arm64 python-yaml arm64 3.12-1build2 [99.0 kB]
Fetched 5,625 kB in 7s (779 kB/s)
Selecting previously unselected package libpython2.7-minimal:arm64.
(Reading database ... 30871 files and directories currently installed.)

Unpacking libapt-pkg5.0:arm64 (1.6.11) over (1.6.3) ...
Setting up libapt-pkg5.0:arm64 (1.6.11) ...
(Reading database ... 31676 files and directories currently installed.)
Preparing to unpack .../00-libapt-inst2.0_1.6.11_arm64.deb ...

Selecting previously unselected package python-six.

Setting up libapt-inst2.0:arm64 (1.6.11) ...
Processing triggers for mime-support (3.60ubuntu1) ...
Processing triggers for libc-bin (2.27-3ubuntu1) ...
Processing triggers for man-db (2.8.3-2) ...
Setting up libpci3:arm64 (1:3.5.2-1ubuntu1.1) ...
Setting up libpython2.7-stdlib:arm64 (2.7.15-4ubuntu4~18.04) ...
Setting up python2.7 (2.7.15-4ubuntu4~18.04) ...
Setting up libpython-stdlib:arm64 (2.7.15~rc1-1) ...
on-psutil
python-singledispatch python-systemd python-tornado python-zmq salt-common
Suggested packages:
debtags python-crypto-doc python-jinja2-doc python-psutil-doc python-mysqldb
python-pycurl python-tornado-doc python-twisted python-augeas
Recommended packages:
javascript-common python-mako dmidecode
The following NEW packages will be installed:
dctrl-tools libjs-jquery libjs-sphinxdoc libjs-underscore libnorm1
libpgm-5.2-0 libsodium23 libzmq5 python-backports-abc
python-concurrent.futures python-crypto python-dateutil python-gnupg
python-jinja2 python-markupsafe python-msgpack python-psutil
python-singledispatch python-systemd python-tornado python-zmq salt-common
salt-minion
0 upgraded, 23 newly installed, 0 to remove and 186 not upgraded.
Need to get 8,568 kB of archives.
After this operation, 38.4 MB of additional disk space will be used.
Get:1 http://ports.ubuntu.com bionic/main arm64 dctrl-tools arm64 2.24-2build1 [54.5 kB]
Get:2 http://ports.ubuntu.com bionic/main arm64 libjs-jquery all 3.2.1-1 [152 kB]
Get:3 https://repo.saltstack.com/apt/ubuntu/1 ... e/2019.2.0 bionic/main amd64 salt-common all 2019.2.0+ds-1 [6,333 kB]
Get:21 http://ports.ubuntu.com bionic/universe arm64 python-tornado arm64 4.5.3-1 [283 kB]
Get:22 http://ports.ubuntu.com bionic/universe arm64 python-zmq arm64 16.0.2-2build2 [208 kB]

Selecting previously unselected package libpgm-5.2-0:arm64.

Preparing to unpack .../12-python-gnupg_0.4.1-1ubuntu1.18.04.1_all.deb ...
Unpacking python-gnupg (0.4.1-1ubuntu1.18.04.1) ...
Preparing to unpack .../18-python-systemd_234-1build1_arm64.deb ...
Unpacking python-systemd (234-1build1) ...
Selecting previously unselected package python-tornado.

Setting up libnorm1:arm64 (1.5r6+dfsg1-6) ...
Setting up python-dateutil (2.6.1-1) ...
Setting up libsodium23:arm64 (1.0.16-2) ...
Processing triggers for libc-bin (2.27-3ubuntu1) ...
Setting up python-psutil (5.4.2-1) ...
Setting up python-systemd (234-1build1) ...
Processing triggers for systemd (237-3ubuntu10.3) ...
Processing triggers for man-db (2.8.3-2) ...
Setting up python-concurrent.futures (3.2.0-1) ...
Setting up python-singledispatch (3.4.0.3-2) ...
Setting up python-gnupg (0.4.1-1ubuntu1.18.04.1) ...
Setting up libzmq5:arm64 (4.2.5-1ubuntu0.1) ...
Setting up python-jinja2 (2.10-1ubuntu0.18.04.1) ...
Setting up python-tornado (4.5.3-1) ...
Setting up python-zmq (16.0.2-2build2) ...
Setting up salt-common (2019.2.0+ds-1) ...
Setting up salt-minion (2019.2.0+ds-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/salt-minion.service → /lib/systemd/system/salt-minion.service.
Processing triggers for libc-bin (2.27-3ubuntu1) ...
Processing triggers for systemd (237-3ubuntu10.3) ...
* INFO: Running install_ubuntu_stable_post()
* INFO: Running install_ubuntu_check_services()
* INFO: Running install_ubuntu_restart_daemons()
* INFO: Running daemons_running()
* INFO: Salt installed!
install.sh: line 642: [[: [2019-06-12 23:55:31] [info] verifty file over
0: syntax error: operand expected (error token is "[2019-06-12 23:55:31] [info] verifty file over
0")
[2019-06-12 23:55:31] [info] All install over




Failed to enable unit: File bxc-node.service: Invalid argument
Failed to start bxc-node.service: Unit bxc-node.service is not loaded properly: Invalid argument.
See system logs and 'systemctl status bxc-node.service' for details.
curl: (7) Failed to connect to localhost port 9017: Connection refused
[2019-06-13 00:37:39] [error] node start faild, rollback and restart
Failed to restart bxc-node.service: Unit bxc-node.service is not loaded properly: Invalid argument.
See system logs and 'systemctl status bxc-node.service' for details.
Would you like to install salt-minion for remote debugging by developers?
If not, the program has problems, you need to solve all the problems you encounter
您是否愿意安装salt-minion ,供开发人员远程调试.
如果否,程序出了问题,您需要自己解决所有遇到的问题,默认YES
[Default YES/N]:^C

努力的猪
小学生
帖子: 20
注册时间: 23 11月 2018, 11:40

Re: 计算任务脚本安装方式(64位)

帖子 努力的猪 » 07 8月 2019, 14:11

数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 07 8月 2019, 15:30

努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
安装过程中有报错吗.另外...绑定了吗
有未记录问题联系https://t.me/wusheng

努力的猪
小学生
帖子: 20
注册时间: 23 11月 2018, 11:40

Re: 计算任务脚本安装方式(64位)

帖子 努力的猪 » 07 8月 2019, 16:09

报错的话,可能就是这个:
E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily navailable)
E: Unable to lock directory /var/lib/apt/lists/
一般报错这个,我都会重新安装!!!
这个我根据网上的方法弄了!
这几个版本我都装了!好像都出现这个问题!

努力的猪
小学生
帖子: 20
注册时间: 23 11月 2018, 11:40

Re: 计算任务脚本安装方式(64位)

帖子 努力的猪 » 07 8月 2019, 16:14

wusheng 写了:
07 8月 2019, 15:30
努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
安装过程中有报错吗.另外...绑定了吗
没有绑定,之前已经绑定过一次了!但是官网后台啥都看不到,而且主要bxc-network也不运行,绑定都没啥用!

努力的猪
小学生
帖子: 20
注册时间: 23 11月 2018, 11:40

Re: 计算任务脚本安装方式(64位)

帖子 努力的猪 » 07 8月 2019, 16:18

wusheng 写了:
07 8月 2019, 15:30
努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
安装过程中有报错吗.另外...绑定了吗
ins.log的相关信息

root@aml:~# cat ins.log
[2019-08-07 05:59:46] [info] system : ubuntu ;Package manager apt
[2019-08-07 05:59:46] [info] installing k8s
[2019-08-07 06:23:28] [info] kubeadm version ok
[2019-08-07 06:23:28] [info] kubelet version ok
[2019-08-07 06:23:28] [info] kubectl version ok
[2019-08-07 06:23:30] [info] dockerd version 18.06.3-ce above 1.11.1 and below 18.06.4
[2019-08-07 06:23:30] [info] docker was found! skiped
[2019-08-07 06:27:49] [info] k8s install over
[2019-08-07 07:55:50] [error] goproxy not runing
[2019-08-07 07:55:50] [error] goproxy socks not run!
[2019-08-07 07:55:54] [info] kubeadm version ok
[2019-08-07 07:55:54] [info] kubelet version ok
[2019-08-07 07:55:54] [info] kubectl version ok
[2019-08-07 08:11:40] [error] goproxy not runing
[2019-08-07 08:11:40] [error] goproxy socks not run!
[2019-08-07 08:11:43] [info] kubeadm version ok
[2019-08-07 08:11:43] [info] kubelet version ok
[2019-08-07 08:11:43] [info] kubectl version ok

alpchen
大学生
帖子: 103
注册时间: 26 3月 2019, 10:59

Re: 计算任务脚本安装方式(64位)

帖子 alpchen » 24 9月 2019, 18:43

努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
跟你一样的问题,一直搞不定

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 24 9月 2019, 19:51

alpchen 写了:
24 9月 2019, 18:43
努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
跟你一样的问题,一直搞不定
内核太老了,最新的N1的镜像已经用上5.0了,你们还死守3.14何苦呢...,
有未记录问题联系https://t.me/wusheng

alpchen
大学生
帖子: 103
注册时间: 26 3月 2019, 10:59

Re: 计算任务脚本安装方式(64位)

帖子 alpchen » 24 9月 2019, 22:18

wusheng 写了:
24 9月 2019, 19:51
alpchen 写了:
24 9月 2019, 18:43
努力的猪 写了:
07 8月 2019, 14:11
数码视讯Q5 s905安装的所有一下固件问题:(使用U盘与内存卡都安装过)
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180729.img
Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180729.img
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_icewm_20180729.img

脚本安装:bxc-network无法运行!

【问题】
显示各组件运行状态时:都提示安装成功,系统已经update,swap任务已经关闭。
1.bxc-network:显示not running、tun0 not create、not running 。
2.k8s显示:not running(重新安装的有几次k8s运行正常:running:但bxc-network一直不运行)。
3.其他组件版本号:
bxc-node:v0.4.4
k8s:v1.12.3
docker:18.06.3-ce

已经安装5、6次了,网络也可以访问git、阿里云等。目前还不知道是怎么情况?
目前正在不断重新安装中……
跟你一样的问题,一直搞不定
内核太老了,最新的N1的镜像已经用上5.0了,你们还死守3.14何苦呢...,
用了5.78,5.90都试过,一样的不行
找群里的大神在帮我安装,有结果再来反馈

alpchen
大学生
帖子: 103
注册时间: 26 3月 2019, 10:59

Re: 计算任务脚本安装方式(64位)

帖子 alpchen » 25 9月 2019, 19:55

群里的大神帮我搞定了,过来反馈一下
主要是docker要装好,装docker之前,需要先安装证书
感觉应该是这个地方出的问题
我自己装的时候,就没装证书
然后就怎样都不行,哪个版本都不行

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 04 4月 2020, 14:18

alpchen 写了:
25 9月 2019, 19:55
群里的大神帮我搞定了,过来反馈一下
主要是docker要装好,装docker之前,需要先安装证书
感觉应该是这个地方出的问题
我自己装的时候,就没装证书
然后就怎样都不行,哪个版本都不行
先安装证书是指先绑定吗?
还是说ca-certificates这个包?
有未记录问题联系https://t.me/wusheng

master89
幼稚园
帖子: 18
注册时间: 08 3月 2020, 10:54

Re: 计算任务脚本安装方式(64位)

帖子 master89 » 15 6月 2020, 17:10

安装的时候只报了这个错但是硬件信息就是报不上
Reading state information... Done
82 packages can be upgraded. Run 'apt list --upgradable' to see them.
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
Find apt
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
其他的都正常运行什么原因啊

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 18 6月 2020, 16:25

master89 写了:
15 6月 2020, 17:10
安装的时候只报了这个错但是硬件信息就是报不上
Reading state information... Done
82 packages can be upgraded. Run 'apt list --upgradable' to see them.
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
Find apt
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
其他的都正常运行什么原因啊
删除这个文件或重启

代码: 全选

rm -v /var/lib/dpkg/lock
有未记录问题联系https://t.me/wusheng

头像
ashuai
小学生
帖子: 33
注册时间: 04 11月 2018, 06:47

Re: 计算任务脚本安装方式(64位)

帖子 ashuai » 25 11月 2020, 07:57

说说我的最新发现。。wget https://bonuscloud-node.s3.cn-north-1.j ... install.sh -O install.sh&&sudo bash install.sh这个命令就能安装docker 然后缺少K8S 再单独安装一下K8S就行。那一句以我的主页为准里面的命令 就不行 安装了 总是提醒docker未安装检查apt。本人小白总结经验 以便我自己以后忘了记查看记录使用。感谢开发者的辛勤劳动。再次感谢。

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 04 5月 2021, 23:14

最近脚本安装好像有问题,设备是树莓派4B+Ubuntu,armbian+nanopik2也不行,tun0起不来,之前在树莓派3B+上安装没问题.....
图片
脚本运行过程中好像只有24行这里有点问题
https://paste.ubuntu.com/p/vV6867HF6J/

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 05 5月 2021, 00:25

御坂10703 写了:
04 5月 2021, 23:14
最近脚本安装好像有问题,设备是树莓派4B+Ubuntu,armbian+nanopik2也不行,tun0起不来,之前在树莓派3B+上安装没问题.....
图片
脚本运行过程中好像只有24行这里有点问题
https://paste.ubuntu.com/p/vV6867HF6J/
是去阿里云拉镜像失败了,再跑下应该就行
有未记录问题联系https://t.me/wusheng

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 05 5月 2021, 00:34

wusheng 写了:
05 5月 2021, 00:25
御坂10703 写了:
04 5月 2021, 23:14
最近脚本安装好像有问题,设备是树莓派4B+Ubuntu,armbian+nanopik2也不行,tun0起不来,之前在树莓派3B+上安装没问题.....
图片
脚本运行过程中好像只有24行这里有点问题
https://paste.ubuntu.com/p/vV6867HF6J/
是去阿里云拉镜像失败了,再跑下应该就行
https://paste.ubuntu.com/p/XYf9BtT2yb/
又运行了一遍,好像还是不行..
图片

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 05 5月 2021, 00:40

御坂10703 写了:
05 5月 2021, 00:34
wusheng 写了:
05 5月 2021, 00:25
御坂10703 写了:
04 5月 2021, 23:14
最近脚本安装好像有问题,设备是树莓派4B+Ubuntu,armbian+nanopik2也不行,tun0起不来,之前在树莓派3B+上安装没问题.....
图片
脚本运行过程中好像只有24行这里有点问题
https://paste.ubuntu.com/p/vV6867HF6J/
是去阿里云拉镜像失败了,再跑下应该就行
https://paste.ubuntu.com/p/XYf9BtT2yb/
又运行了一遍,好像还是不行..
图片
那你docker image看看镜像拉下来没有,要是拉下来了就看看bxc-node 这个服务有没有啥报错
有未记录问题联系https://t.me/wusheng

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 05 5月 2021, 00:45

wusheng 写了:
05 5月 2021, 00:40
御坂10703 写了:
05 5月 2021, 00:34
wusheng 写了:
05 5月 2021, 00:25


是去阿里云拉镜像失败了,再跑下应该就行
https://paste.ubuntu.com/p/XYf9BtT2yb/
又运行了一遍,好像还是不行..
图片
那你docker image看看镜像拉下来没有,要是拉下来了就看看bxc-node 这个服务有没有啥报错
emmm
图片

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 05 5月 2021, 08:34

御坂10703 写了:
05 5月 2021, 00:45
wusheng 写了:
05 5月 2021, 00:40
御坂10703 写了:
05 5月 2021, 00:34


https://paste.ubuntu.com/p/XYf9BtT2yb/
又运行了一遍,好像还是不行..
图片
那你docker image看看镜像拉下来没有,要是拉下来了就看看bxc-node 这个服务有没有啥报错
emmm
图片
貌似之前还是镜像没拉下来.早上看镜像已经拉下来了.现在树莓派4b+ubuntu正常了...

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 05 5月 2021, 09:14

nanopik2+armbian的kubelet一直反复重启.....
https://paste.ubuntu.com/p/kgv6sS9C8q/

Failed to start ContainerManager failed to initialize top level QOS containers: failed to update top level Burstable QOS cgroup : failed to set supported cgroup subsystems for cgroup [kubepods burstable]: Failed to set config for supported subsystems : failed to write 4611686018427387904 to hugetlb.64kB.limit_in_bytes: open /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes: permission denied

御坂10703
中学生
帖子: 51
注册时间: 03 11月 2018, 21:13

Re: 计算任务脚本安装方式(64位)

帖子 御坂10703 » 05 5月 2021, 09:29

御坂10703 写了:
05 5月 2021, 09:14
nanopik2+armbian的kubelet一直反复重启.....
https://paste.ubuntu.com/p/kgv6sS9C8q/

Failed to start ContainerManager failed to initialize top level QOS containers: failed to update top level Burstable QOS cgroup : failed to set supported cgroup subsystems for cgroup [kubepods burstable]: Failed to set config for supported subsystems : failed to write 4611686018427387904 to hugetlb.64kB.limit_in_bytes: open /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes: permission denied
貌似这个文件的K是大写的...
root@nanopik2-s905:~# cat /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64KB.limit_in_bytes
9223372036854710272
root@nanopik2-s905:~# cat /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes
cat: /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes: No such file or directory
root@nanopik2-s905:~#

头像
wusheng
硕士研究生
帖子: 260
注册时间: 01 11月 2018, 18:13

Re: 计算任务脚本安装方式(64位)

帖子 wusheng » 05 5月 2021, 13:04

御坂10703 写了:
05 5月 2021, 09:29
御坂10703 写了:
05 5月 2021, 09:14
nanopik2+armbian的kubelet一直反复重启.....
https://paste.ubuntu.com/p/kgv6sS9C8q/

Failed to start ContainerManager failed to initialize top level QOS containers: failed to update top level Burstable QOS cgroup : failed to set supported cgroup subsystems for cgroup [kubepods burstable]: Failed to set config for supported subsystems : failed to write 4611686018427387904 to hugetlb.64kB.limit_in_bytes: open /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes: permission denied
貌似这个文件的K是大写的...
root@nanopik2-s905:~# cat /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64KB.limit_in_bytes
9223372036854710272
root@nanopik2-s905:~# cat /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes
cat: /sys/fs/cgroup/hugetlb/kubepods/burstable/hugetlb.64kB.limit_in_bytes: No such file or directory
root@nanopik2-s905:~#
查了下是k8s的bug,目前暂时只能先降下内核版本到4.x试试,后面应该会升级k8s来解决这些问题
有未记录问题联系https://t.me/wusheng

回复