S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

版主: 论坛版主

回复
重逢的雨季
新人报道
帖子: 2
注册时间: 周二 7月 23, 2019 7:11 am

S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 重逢的雨季 » 周二 7月 23, 2019 7:31 am

镜像下载:

理论上适用于CPU是S905L的电视机顶盒,测试使用机顶盒为百事通R3300L


1.准备工作
盒子无法从U盘启动,准备一个8G TF卡。

U盘/TF卡烧录工具



2.刷入系统



如果设备为百事通R3300L:
1.将镜像烧录进TF卡后,插上TF卡。

2.直接用牙签捅盒子的AV孔,长的像耳机孔一样的一个洞,最里面里面有一个按钮的,按住再开机可以直接将TF卡中的镜像烧入emmc,电源指示灯绿色变红色后可以放开按钮。

3.刷机完成,内网下使用绑定工具绑定即可。

(百事通R3300L到此已经刷机完成,可以无视下方内容,如果绑定过程中报错dev has been bound,参考 viewtopic.php?f=15&t=5906 修改mac即可,较少遇到)


如果设备为其他型号,需要root或TTL,如:
咪咕盒子 MGV2000
GHBOX GF09
魔百盒 E900V21C
创维E900-S
中兴盒子B860AV2.1
请自行百度搜索对应设备的线刷教程


部分设备可以直接进系统像N1一样通过adb进入刷机模式,用线刷工具刷入带root的S905L镜像即可,操作方式一模一样。

参考N1教程:viewtopic.php?f=48&t=690


部分设备需要用TTL刷机

插上内存卡,TTL,波特率115200,打开串口后开机,原生固件会自动启动盒子的系统,上电一瞬间在ttl里面狂按回车键打断启动。
2.png
输入reboot update回车进入自动刷机模式,这时候TTL就可以拔掉了,屏幕会显示刷机过程。

刷机过程需要6分钟。

刷机完毕会自动关机。

关闭电源键,拿出SD卡,再按电源键开机。



3.刷完系统绑定即可



绑定工具:在同网络环境下的Windows电脑或者Android手机上,使用绑定工具绑定即可。
Windows电脑绑定工具:viewtopic.php?f=21&t=5233

Android手机绑定用APP:http://bonuscloud-imgs.oss.cn-north-1.j ... -forPI.apk

或用下方命令行绑定

代码: 全选

curl -H "Content-Type: application/json" -d '{"bcode":"xxxx-xxxxxxxx","email":"xxxx@xxxx"}' http://localhost:9017/bound
把bcode的xxx换成从后台领取的BCode
email里面的换成账号注册的
localhost换成设备的内网IP即可
上次由 重逢的雨季 在 周二 8月 13, 2019 8:51 am,总共编辑 1 次。

xiaohai
新人报道
帖子: 1
注册时间: 周日 8月 11, 2019 7:07 pm

Re: S905L机顶盒刷博纳云定制固件教程

帖子 xiaohai » 周日 8月 11, 2019 7:18 pm

"可以直接进系统像N1那样通过adb进入刷机模式也可以,需要用线刷工具刷入带root的S905L镜像即可,操作方式一模一样。 "

这这个步骤看不明白,是指通过 adb 连接上盒子之后, 在adb shell 里面输入命令 : reboot update 吗 ?

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程

帖子 二 猫 » 周一 8月 12, 2019 3:44 am

xiaohai 写了:
周日 8月 11, 2019 7:18 pm
"可以直接进系统像N1那样通过adb进入刷机模式也可以,需要用线刷工具刷入带root的S905L镜像即可,操作方式一模一样。 "

这这个步骤看不明白,是指通过 adb 连接上盒子之后, 在adb shell 里面输入命令 : reboot update 吗 ?
用线刷工具,刷入镜像包
BonusCloud.io

alpchen
中学生
帖子: 74
注册时间: 周二 3月 26, 2019 2:59 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 alpchen » 周三 8月 28, 2019 3:21 pm

在哪可以查盒子的芯片的?
有2台中兴B860AV,版本不一样
还有一台移动cm101s-2

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周四 8月 29, 2019 4:16 am

alpchen 写了:
周三 8月 28, 2019 3:21 pm
在哪可以查盒子的芯片的?
有2台中兴B860AV,版本不一样
还有一台移动cm101s-2
上网搜型号,或者拆机看CPU
BonusCloud.io

alpchen
中学生
帖子: 74
注册时间: 周二 3月 26, 2019 2:59 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 alpchen » 周五 8月 30, 2019 7:45 am

Sinan Wang 写了:
周四 8月 29, 2019 4:16 am
alpchen 写了:
周三 8月 28, 2019 3:21 pm
在哪可以查盒子的芯片的?
有2台中兴B860AV,版本不一样
还有一台移动cm101s-2
上网搜型号,或者拆机看CPU
CPU上有块散热片,要弄掉才能看,弄下来了,再怎么装回去?

alpchen
中学生
帖子: 74
注册时间: 周二 3月 26, 2019 2:59 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 alpchen » 周五 8月 30, 2019 7:52 am

Sinan Wang 写了:
周四 8月 29, 2019 4:16 am
alpchen 写了:
周三 8月 28, 2019 3:21 pm
在哪可以查盒子的芯片的?
有2台中兴B860AV,版本不一样
还有一台移动cm101s-2
上网搜型号,或者拆机看CPU
拆了一个看了一下,是MSO9280
是不是就刷不了了

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周五 8月 30, 2019 9:47 am

alpchen 写了:
周五 8月 30, 2019 7:52 am
Sinan Wang 写了:
周四 8月 29, 2019 4:16 am
alpchen 写了:
周三 8月 28, 2019 3:21 pm
在哪可以查盒子的芯片的?
有2台中兴B860AV,版本不一样
还有一台移动cm101s-2
上网搜型号,或者拆机看CPU
拆了一个看了一下,是MSO9280
是不是就刷不了了
是的
BonusCloud.io

alpchen
中学生
帖子: 74
注册时间: 周二 3月 26, 2019 2:59 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 alpchen » 周五 8月 30, 2019 4:02 pm

拆到一个s905M-B的和s905的
这两个能刷吗?

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周六 8月 31, 2019 9:46 am

alpchen 写了:
周五 8月 30, 2019 4:02 pm
拆到一个s905M-B的和s905的
这两个能刷吗?
S905应该可以 M-B得试试
BonusCloud.io

qfnuzlr
中学生
帖子: 56
注册时间: 周日 11月 04, 2018 1:38 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 qfnuzlr » 周六 9月 14, 2019 5:27 am

MGV2000 刷入后 半砖 获取不到ip
也刷不会盒子了
TTL信息如下 如何进去系统 密码什么
BL2 Built : 19:16:55, Jun 22 2018.
gxl gb679ae5 - yao.zhang@droid07
Board ID = 3, adc=225
GET GPIO_AO_4 VALUE:16-------
set gpio_ao_4 high
CPU clk: 1200MHz
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 25 05 45 2e 12 4b 20 0040 33 12 54 22 01 43 31 11 52 22 02 42 36 12 5a 650 - PASS
Rank0: 1024MB(auto)-2T-11
AddrBus test pass!
emmc 52M
-s
Load fip header from eMMC, src: 0x0000c200,des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des:0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des:0x01380000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des:0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des:0x01000000, size: 0x00047200
NOTICE: BL3-1: v1.0(debug):521e8c3
NOTICE: BL3-1: Built : 14:22:49, Jun 52018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-27cb61a 2018-07-1113:57:47 xianghua.tan@droid12-sz]
efuse init ops = c5
efuse init hdcp = c, cf9=7
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 2f b4 68 a0 0 c5 not ESchip
[0.528069 Inits done]
sINFO: BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 bootloader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9
scure task
ar
- t!U
Bohiogth 2task 0s1t5a.rt0!1
1(lowF teasbk 2st0ar t2!0
9 -11:14:09)
DRAM: 1 GiB
Relocation Offset is: 36eef000
gpio: pin GPIODV_25 (gpio 44) value is 1
register usb cfg[0][1] = 0000000037f61700
[CANVAS]canvas init
vpu: error: vpu: check dts:FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback:666660000Hz(0x300)
vpp: vpp_init
MMC: aml_priv->desc_buf = 0x0000000033edfac0
aml_priv->desc_buf = 0x0000000033ee1de0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8,status=0x3ff2800
emmc/sd response timeout, cmd55,status=0x3ff2800
init_part() 278: PART_TYPE_DOS
[mmc_init] mmc init success
dtb magic 5f4c4d41
Amlogic multi-dtb tool
Multi dtb detected
unified board, board id = 43
Multi dtb tool version: v2 .
Support 6 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 1g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxlx plat: p261 vari: 1g
dtb 2 soc: gxlx plat: p265 vari: 1g
dtb 3 soc: gxlx plat: p265 vari: 2g
dtb 4 soc: gxlx2 plat: p291 vari: 1g
dtb 5 soc: gxlx2 plat: p291 vari: 2g
Find match dtb: 4
startdts,buffer=0000000033ee4610,dt_addr=0000000033f0c610
Amlogic multi-dtb tool
Multi dtb detected
unified board, board id = 43
Multi dtb tool version: v2 .
Support 6 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 1g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxlx plat: p261 vari: 1g
dtb 2 soc: gxlx plat: p265 vari: 1g
dtb 3 soc: gxlx plat: p265 vari: 2g
dtb 4 soc: gxlx2 plat: p291 vari: 1g
dtb 5 soc: gxlx2 plat: p291 vari: 2g
Find match dtb: 4
parts: 12
00: logo 0000000002000000 1
01: recovery 0000000002000000 1
02: rsv 0000000000800000 1
03: tee 0000000000800000 1
04: crypt 0000000002000000 1
05: misc 0000000002000000 1
06: boot 0000000002000000 1
07: system 0000000040000000 1
08: cache 0000000020000000 2
09: params 0000000004000000 2
10: bootfiles 0000000020000000 2
11: data ffffffffffffffff 4
init_part() 278: PART_TYPE_DOS
eMMC/TSD partition table have been checkedOK!
check pattern success
mmc env offset: 0x27400000
In: serial
Out: serial
Err: serial
board id is : 43
hpd_state=0
cvbs performance type = 7, table = 0
[store]To run cmd[emmc dtb_read 0x10000000x40000]
_verify_dtb_checksum()-924: calc 9ea74ac4,store 9ea74ac4
_verify_dtb_checksum()-924: calc 9ea74ac4,store 9ea74ac4
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
Amlogic multi-dtb tool
Multi dtb detected
Multi dtb tool version: v2 .
Support 6 dtbs.
aml_dt soc: gxlx2 platform: p291 variant: 1g
dtb 0 soc: gxl plat: p211 vari: 1g
dtb 1 soc: gxlx plat: p261 vari: 1g
dtb 2 soc: gxlx plat: p265 vari: 1g
dtb 3 soc: gxlx plat: p265 vari: 2g
dtb 4 soc: gxlx2 plat: p291 vari: 1g
dtb 5 soc: gxlx2 plat: p291 vari: 2g
Find match dtb: 4
wipe_data=successful
wipe_cache=successful
bmp pixel: 24
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=5760,height=2160
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[keymanage_dts_get_key_device]L85:modelkey name is not exist
[KM]Error:f[_get_km_ops_by_name]L231:keymodel not know device 4
[KM]Error:f[key_manage_query_exist]L546:Thereisn't dts cfg for key[model]
[KM]Error:f[key_manage_query_size]L503:Failin query key exist
boot_select kernel[0,3) recovery[3,10)factory[10,*)
boot_select current count=0
boot_select count=0
boot_select=kernel
rebootmode=cold_boot
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USBDevice(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 1 **
** Bad device usb 2 **
** Bad device usb 3 **
card out
emmc/sd response timeout, cmd8,status=0x1ff2800
emmc/sd response timeout, cmd55,status=0x1ff2800
emmc/sd response timeout, cmd1,status=0x1ff2800
reading emmc_autoscript
594 bytes read in 3 ms (193.4 KiB/s)
## Executing script at 01020000
reading zImage
20498440 bytes read in 592 ms (33 MiB/s)
reading uInitrd
5447011 bytes read in 164 ms (31.7 MiB/s)
reading uEnv.ini
230 bytes read in 3 ms (74.2 KiB/s)
reading /dtb/meson-gxl-s905x-r3300l.dtb
27790 bytes read in 6 ms (4.4 MiB/s)
[KM]Error:f[keymanage_dts_parse]L261:dts:err(FDT_ERR_NOTFOUND) in find /unifykey.
libfdt fdt_path_offset() returnedFDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addrerror.
## Loading init Ramdisk from Legacy Imageat 13000000 ...
Image Name: uInitrd
Image Type: AArch64 LinuxRAMDisk Image (gzip compressed)
Data Size: 5446947 Bytes = 5.2MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Amlogic multi-dtb tool
Single dtb detected
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
libfdt fdt_path_offset() returnedFDT_ERR_NOTFOUND
[rsvmem] bl31 reserved memory set addrerror.
Loading Ramdisk to 339aa000, end 33edbd23 ... OK
Loading Device Tree to 000000000fff6000, end 000000000ffffc8d ... OK
fdt_instaboot: get header err
Starting kernel ...
uboot time: 4090057 us
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.0.0-aml-N1-BonusCloud-1-2+ (root@bonuscloud)(gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #2 SMP MonJun 3 12:46:43 CST 2019
[ 0.000000] Machine model: R3300-L
[ 0.000000] OF: reserved mem: failed to allocate memory for node'linux,cma'
[ 0.000000] cma: Reserved 256 MiB at 0x0000000023800000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x3ecwith crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s54872 r8192d31144 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 220480
[ 0.000000] Kernel command line: root=LABEL=ROOT_EMMCrootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes fsck.mode=forcenet.ifnames=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 585600K/896000K available (13758K kernel code, 1138Krwdata, 4452K rodata, 576K init, 759K bss, 48256K reserved, 262144Kcma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCUrestricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffffmax_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every4398046511097ns
[ 0.000386] Console: colour dummy device 80x25
[ 0.000576] printk: console [tty0] enabled
[ 0.000609] Calibrating delay loop (skipped), value calculated using timerfrequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000626] pid_max: default: 32768 minimum: 301
[ 0.000705] LSM: Security Framework initializing
[ 0.000758] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000772] Mountpoint-cache hash table entries: 2048 (order: 2, 16384bytes)
[ 0.001764] ASID allocator initialised with 32768 entries
[ 0.001835] rcu: Hierarchical SRCU implementation.
[ 0.004396] smp: Bringing up secondary CPUs ...
[ 0.004818] Detected VIPT I-cache on CPU1
[ 0.004870] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.005296] Detected VIPT I-cache on CPU2
[ 0.005330] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005732] Detected VIPT I-cache on CPU3
[ 0.005764] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005820] smp: Brought up 1 node, 4 CPUs
[ 0.005869] SMP: Total of 4 processors activated.
[ 0.005878] CPU features: detected: 32-bit EL0 Support
[ 0.005887] CPU features: detected: CRC32 instructions
[ 0.006171] CPU: All CPU(s) started at EL2
[ 0.006192] alternatives: patching kernel code
[ 0.006908] devtmpfs: initialized
[ 0.011093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,max_idle_ns: 7645041785100000 ns
[ 0.011124] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.018067] xor: measuring software checksum speed
[ 0.056173] 8regs : 2303.000 MB/sec
[ 0.096202] 32regs : 2831.000 MB/sec
[ 0.136234] arm64_neon: 2510.000 MB/sec
[ 0.136242] xor: using function: 32regs (2831.000 MB/sec)
[ 0.136259] pinctrl core: initialized pinctrl subsystem
[ 0.137426] NET: Registered protocol family 16
[ 0.137882] audit: initializing netlink subsys (disabled)
[ 0.138017] audit: type=2000 audit(0.136:1): state=initializedaudit_enabled=0 res=1
[ 0.138851] cpuidle: using governor menu
[ 0.139207] vdso: 2 pages (1 code @ (____ptrval____), 1 data @(____ptrval____))
[ 0.139230] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.140024] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.140730] Serial: AMBA PL011 UART driver
[ 0.158303] cryptd: max_cpu_qlen set to 1000
[ 0.224463] raid6: neonx8 gen() 1723 MB/s
[ 0.292489] raid6: neonx8 xor() 1571 MB/s
[ 0.360563] raid6: neonx4 gen() 1585 MB/s
[ 0.428574] raid6: neonx4 xor() 1480 MB/s
[ 0.496663] raid6: neonx2 gen() 1223 MB/s
[ 0.564685] raid6: neonx2 xor() 1232 MB/s
[ 0.632767] raid6: neonx1 gen() 755 MB/s
[ 0.700781] raid6: neonx1 xor() 865 MB/s
[ 0.768851] raid6: int64x8 gen() 1003 MB/s
[ 0.836881] raid6: int64x8 xor() 757 MB/s
[ 0.904947] raid6: int64x4 gen() 1083 MB/s
[ 0.972987] raid6: int64x4 xor() 767 MB/s
[ 1.041054] raid6: int64x2 gen() 724 MB/s
[ 1.109094] raid6: int64x2 xor() 609 MB/s
[ 1.177198] raid6: int64x1 gen() 478 MB/s
[ 1.245180] raid6: int64x1 xor() 443 MB/s
[ 1.245188] raid6: using algorithm neonx8 gen() 1723 MB/s
[ 1.245195] raid6: .... xor() 1571 MB/s, rmw enabled
[ 1.245204] raid6: using neon recovery algorithm
[ 1.245648] fbcon: Taking over console
[ 1.247548] vgaarb: loaded
[ 1.247836] SCSI subsystem initialized
[ 1.248265] usbcore: registered new interface driver usbfs
[ 1.248348] usbcore: registered new interface driver hub
[ 1.248426] usbcore: registered new device driver usb
[ 1.249008] pps_core: LinuxPPS API ver. 1 registered
[ 1.249030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 RodolfoGiometti <giometti@linux.it>
[ 1.249064] PTP clock support registered
[ 1.249396] EDAC MC: Ver: 3.0.0
[ 1.250331] Advanced Linux Sound Architecture Driver Initialized.
[ 1.251226] clocksource: Switched to clocksource arch_sys_counter
[ 1.251409] VFS: Disk quotas dquot_6.6.0
[ 1.251463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.251538] FS-Cache: Loaded
[ 1.258671] NET: Registered protocol family 2
[ 1.259139] tcp_listen_portaddr_hash hash table entries: 512 (order: 1,8192 bytes)
[ 1.259172] TCP established hash table entries: 8192 (order: 4, 65536bytes)
[ 1.259265] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.259383] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.259508] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.259540] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.259685] NET: Registered protocol family 1
[ 1.260046] RPC: Registered named UNIX socket transport module.
[ 1.260062] RPC: Registered udp transport module.
[ 1.260070] RPC: Registered tcp transport module.
[ 1.260077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.260249] Unpacking initramfs...
[ 1.478834] Freeing initrd memory: 5316K
[ 1.479703] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7counters available
[ 1.480053] kvm [1]: 8-bit VMID
[ 1.480068] kvm [1]: IPA Size Limit: 40bits
[ 1.480661] kvm [1]: vgic interrupt IRQ1
[ 1.480760] kvm [1]: Hyp mode initialized successfully
[ 1.591196] Initialise system trusted keyrings
[ 1.591367] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.597140] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.597522] FS-Cache: Netfs 'nfs' registered for caching
[ 1.598087] NFS: Registering the id_resolver key type
[ 1.598124] Key type id_resolver registered
[ 1.598131] Key type id_legacy registered
[ 1.598150] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.598371] FS-Cache: Netfs 'cifs' registered for caching
[ 1.598648] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.599182] JFS: nTxBlock = 6664, nTxLock = 53316
[ 1.602739] SGI XFS with security attributes, no debug enabled
[ 1.604270] 9p: Installing v9fs 9p2000 file system support
[ 1.604619] ocfs2: Registered cluster interface o2cb
[ 1.604805] OCFS2 User DLM kernel interface loaded
[ 1.606200] gfs2: GFS2 installed
[ 1.688189] Key type asymmetric registered
[ 1.688213] Asymmetric key parser 'x509' registered
[ 1.688283] Block layer SCSI generic (bsg) driver version 0.4 loaded(major 244)
[ 1.688304] io scheduler mq-deadline registered
[ 1.688313] io scheduler kyber registered
[ 1.701442] meson_vid_pll_div_recalc_rate: Invalid config value forvid_pll_div
[ 1.704758] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2)Detected
[ 1.708557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.710310] Serial: AMBA driver
[ 1.710688] c11084c0.serial: ttyAML1 at MMIO 0xc11084c0 (irq = 10,base_baud = 1500000) is a meson_uart
[ 1.710850] serial serial0: tty port ttyAML1 registered
[ 1.711151] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15,base_baud = 1500000) is a meson_uart
[ 2.537920] printk: console [ttyAML0] enabled
[ 2.542825] c81004e0.serial: ttyAML2 at MMIO 0xc81004e0 (irq = 16,base_baud = 1500000) is a meson_uart
[ 2.560084] loop: module loaded
[ 2.560617] zram: Added device: zram0
[ 2.564239] libphy: Fixed MDIO Bus: probed
[ 2.565590] tun: Universal TUN/TAP device driver, 1.6
[ 2.571163] thunder_xcv, ver 1.0
[ 2.573555] thunder_bgx, ver 1.0
[ 2.576731] nicpf, ver 1.0
[ 2.580006] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.585139] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.591059] igb: Intel(R) Gigabit Ethernet Network Driver - version5.4.0-k
[ 2.597899] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.603459] igbvf: Intel(R) Gigabit Virtual Function Network Driver -version 2.4.0-k
[ 2.611180] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.617274] sky2: driver version 1.30
[ 2.621184] VFIO - User Level meta-driver version: 0.3
[ 2.627046] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
[ 2.632955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.637786] ehci-pci: EHCI PCI platform driver
[ 2.642217] ehci-platform: EHCI generic platform driver
[ 2.647576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.653465] ohci-pci: OHCI PCI platform driver
[ 2.657915] ohci-platform: OHCI generic platform driver
[ 2.663836] usbcore: registered new interface driver usb-storage
[ 2.670902] mousedev: PS/2 mouse device common for all mice
[ 2.675460] i2c /dev entries driver
[ 2.680859] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised:dm-devel@redhat.com
[ 2.687139] sdhci: Secure Digital Host Controller Interface driver
[ 2.692448] sdhci: Copyright(c) Pierre Ossman
[ 2.696983] Synopsys Designware Multimedia Card Interface Driver
[ 2.703870] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
[ 2.709558] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
[ 2.716414] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
[ 2.722921] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
[ 2.729792] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.2
[ 2.736277] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.1
[ 2.743105] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.774778] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.4
[ 2.776071] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.1
[ 2.782890] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 2.815272] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.816635] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.821865] meson-sm: secure-monitor enabled
[ 2.825778] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.831925] usbcore: registered new interface driver usbhid
[ 2.836360] usbhid: USB HID core driver
[ 2.840521] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 2.847966] meson-saradc c1108680.adc: Linked as a consumer to regulator.3
[BL31]: tee size: 0
[ 2.857675] NET: Registered protocol family 17
[ 2.860160] 9pnet: Installing 9P2000 support
[ 2.864286] Key type dns_resolver registered
[ 2.869148] registered taskstats version 1
[ 2.872504] Loading compiled-in X.509 certificates
[ 2.878389] Btrfs loaded, crc32c=crc32c-generic
[ 2.890592] phy phy-d0078000.phy.0: Linked as a consumer to regulator.5
[ 2.893332] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 2.897513] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.903660] [drm] No driver support for vblank timestamp query.
[ 2.904953] mmc1: mmc_select_hs200 failed, error -74
[ 2.909625] meson-drm d0100000.vpu: CVBS Output connector not available
[ 2.916275] mmc1: new MMC card at address 0001
[ 2.921128] meson-dw-hdmi c883a000.hdmi-tx: Linked as a consumer toregulator.5
[ 2.933577] mmcblk1: mmc1:0001 T22708 7.13 GiB
[ 2.937761] mmcblk1boot0: mmc1:0001 T22708 partition 1 4.00 MiB
[ 2.943614] mmcblk1boot1: mmc1:0001 T22708 partition 2 4.00 MiB
[ 2.949022] mmcblk1rpmb: mmc1:0001 T22708 partition 3 4.00 MiB, chardev(241:0)
[ 2.957675] mmcblk1: p1 p2
[ 2.959350] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller(0d0d:0d:0d)
[ 2.966721] WARNING: CPU: 1 PID: 32 at drivers/regulator/core.c:2054_regulator_put.part.9+0xf0/0xf8
[ 2.975576] Modules linked in:
[ 2.978600] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted5.0.0-aml-N1-BonusCloud-1-2+ #2
[ 2.986616] Hardware name: R3300-L (DT)
[ 2.990418] Workqueue: events deferred_probe_work_func
[ 2.995501] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 3.000245] pc : _regulator_put.part.9+0xf0/0xf8
[ 3.004816] lr : regulator_put+0x34/0x50
[ 3.008696] sp : ffff00001013b910
[ 3.011973] x29: ffff00001013b910 x28: ffff800036037180
[ 3.017234] x27: 00000000ffffffed x26: 0000000000000001
[ 3.022496] x25: ffff0000123c9800 x24: 000000000000000f
[ 3.027757] x23: ffff00001013b9b8 x22: ffff800036168c10
[ 3.033018] x21: ffff000012315000 x20: ffff800036037900
[ 3.038279] x19: ffff800036037900 x18: 0000000000000400
[ 3.043540] x17: 0000000000006a48 x16: 0000000000006a44
[ 3.048802] x15: 0000000000000400 x14: 0000000000000400
[ 3.054063] x13: 0000000000000000 x12: 0000000000000001
[ 3.059324] x11: 0000000001624292 x10: 0000000000000000
[ 3.064585] x9 : ffff7e0000d80de0 x8 : 0000000000000000
[ 3.069847] x7 : ffff800005303b00 x6 : ffff000012315688
[ 3.075108] x5 : 0000000000210d00 x4 : 0000000000000000
[ 3.080369] x3 : 0000000000000000 x2 : ffff80001032a640
[ 3.085630] x1 : 0000000000000000 x0 : 0000000000000001
[ 3.090892] Call trace:
[ 3.093310] _regulator_put.part.9+0xf0/0xf8
[ 3.097535] regulator_put+0x34/0x50
[ 3.101072] devm_regulator_release+0x10/0x18
[ 3.105384] release_nodes+0x138/0x228
[ 3.109092] devres_release_group+0xa8/0x108
[ 3.113321] component_bind_all+0x1a8/0x2c0
[ 3.117459] meson_drv_bind_master+0x38c/0x490
[ 3.121857] meson_drv_bind+0x10/0x18
[ 3.125480] try_to_bring_up_master+0x21c/0x300
[ 3.129966] component_master_add_with_match+0xb4/0x100
[ 3.135140] meson_drv_probe+0xdc/0x140
[ 3.138937] platform_drv_probe+0x50/0xa0
[ 3.142903] really_probe+0x2b8/0x3d0
[ 3.146525] driver_probe_device+0x12c/0x148
[ 3.150751] __device_attach_driver+0xa8/0x158
[ 3.155150] bus_for_each_drv+0x64/0xc8
[ 3.158945] __device_attach+0xd8/0x158
[ 3.162740] device_initial_probe+0x10/0x18
[ 3.166880] bus_probe_device+0x90/0x98
[ 3.170675] deferred_probe_work_func+0x88/0xe0
[ 3.175163] process_one_work+0x1e4/0x368
[ 3.179128] worker_thread+0x268/0x4b0
[ 3.182837] kthread+0x128/0x130
[ 3.186029] ret_from_fork+0x10/0x1c
[ 3.189562] ---[ end trace fc6f7f8c88ec153e ]---
[ 3.194190] meson-dw-hdmi c883a000.hdmi-tx: Dropping the link toregulator.5
[ 3.201162] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (opsmeson_dw_hdmi_ops): -19
[ 3.209846] meson-drm d0100000.vpu: Couldn't bind all components
[ 3.215905] meson-drm d0100000.vpu: master bind failed: -19
[ 3.224267] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.226756] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned busnumber 1
[ 3.234935] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version0x100 quirks 0x0000000002010010
[ 3.243714] xhci-hcd xhci-hcd.0.auto: irq 40, io mem 0xc9000000
[ 3.249788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,bcdDevice= 5.00
[ 3.257717] usb usb1: New USB device strings: Mfr=3, Product=2,SerialNumber=1
[ 3.264870] usb usb1: Product: xHCI Host Controller
[ 3.269698] usb usb1: Manufacturer: Linux 5.0.0-aml-N1-BonusCloud-1-2+xhci-hcd
[ 3.276942] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.282222] hub 1-0:1.0: USB hub found
[ 3.285534] hub 1-0:1.0: 2 ports detected
[ 3.289757] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.294903] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned busnumber 2
[ 3.302486] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.309095] usb usb2: We don't know the algorithms for LPM for this host,disabling LPM.
[ 3.317147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003,bcdDevice= 5.00
[ 3.325244] usb usb2: New USB device strings: Mfr=3, Product=2,SerialNumber=1
[ 3.332400] usb usb2: Product: xHCI Host Controller
[ 3.337230] usb usb2: Manufacturer: Linux 5.0.0-aml-N1-BonusCloud-1-2+xhci-hcd
[ 3.344474] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 3.349710] hub 2-0:1.0: USB hub found
[ 3.353059] hub 2-0:1.0: config failed, hub doesn't have any ports! (err-19)
[ 3.361330] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
[ 3.366959] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
[ 3.373813] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
[ 3.380306] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
[ 3.388788] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_dvfs_info 002b
[ 3.406235] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
[ 3.407545] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
[ 3.414427] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
[ 3.420896] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
[ 3.429470] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
[ 3.434305] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
[ 3.441132] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
[ 3.447630] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
[ 3.454966] hctosys: unable to open rtc device (rtc0)
[ 3.459441] VDDAO_3V3: disabling
[ 3.462332] ALSA device list:
[ 3.465276] No soundcards found.
[ 3.469027] Freeing unused kernel memory: 576K
[ 3.495292] Run /init as init process
[ 3.536271] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.538167] random: systemd-udevd: uninitialized urandom read (16 bytesread)
[ 3.541558] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.861267] random: fast init done
[ 6.221653] EXT4-fs (mmcblk1p2): mounted filesystem with writeback datamode. Opts: data=writeback
[ 6.732925] systemd[1]: System time before build time, advancing clock.
[ 6.849989] NET: Registered protocol family 10
[ 6.850608] Segment Routing with IPv6
[ 6.897260] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.909996] systemd[1]: Detected architecture arm64.
[ 6.916274] systemd[1]: Set hostname to <BonusCloud-Lite>.
[ 7.205235] systemd[1]: [/etc/systemd/system/systemd-udevd.service:31]Unknown lvalue 'IPAddressAllow' in section 'Service'
[ 7.322196] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.324210] systemd[1]: Started Dispatch Password Requests to ConsoleDirectory Watch.
[ 7.331680] systemd[1]: Listening on udev Control Socket.
[ 7.336906] systemd[1]: Listening on LVM2 poll daemon socket.
[ 7.342830] systemd[1]: Listening on Journal Audit Socket.
[ 7.348099] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.490232] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[ 7.568900] Loading iSCSI transport class v2.0-870.
[ 7.633271] iscsi: registered transport (tcp)
[ 7.715489] systemd-journald[1544]: Received request to flush runtimejournal from PID 1
Debian GNU/Linux 9 BonusCloud-Lite ttyAML0
BonusCloud-Lite login:

qfnuzlr
中学生
帖子: 56
注册时间: 周日 11月 04, 2018 1:38 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 qfnuzlr » 周六 9月 14, 2019 5:31 am

如何进入 博纳系统 激活盒子线刷模式 刷回盒子或者刷入合适的盒子系统

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周一 9月 16, 2019 4:00 am

qfnuzlr 写了:
周六 9月 14, 2019 5:31 am
如何进入 博纳系统 激活盒子线刷模式 刷回盒子或者刷入合适的盒子系统
你这个是因为网卡识别不到,所以连不上网,稍微晚点让我们社区的开发朋友测试一下这个机型
BonusCloud.io

qfnuzlr
中学生
帖子: 56
注册时间: 周日 11月 04, 2018 1:38 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 qfnuzlr » 周三 9月 18, 2019 3:40 am

我的刷博纳后 这种情况能不能告知登录用户名和密码 进去系统救回盒子
目前这个日期的盒子 无法进入线刷模式

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周四 9月 19, 2019 6:48 am

qfnuzlr 写了:
周三 9月 18, 2019 3:40 am
我的刷博纳后 这种情况能不能告知登录用户名和密码 进去系统救回盒子
目前这个日期的盒子 无法进入线刷模式
这个镜像也没有密码,不支持登录,你这个已经root了,不能用U盘或者TF卡刷入吗
BonusCloud.io

qfnuzlr
中学生
帖子: 56
注册时间: 周日 11月 04, 2018 1:38 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 qfnuzlr » 周五 9月 20, 2019 5:29 am

二 猫 写了:
周四 9月 19, 2019 6:48 am
qfnuzlr 写了:
周三 9月 18, 2019 3:40 am
我的刷博纳后 这种情况能不能告知登录用户名和密码 进去系统救回盒子
目前这个日期的盒子 无法进入线刷模式
这个镜像也没有密码,不支持登录,你这个已经root了,不能用U盘或者TF卡刷入吗
目前TTL看到 进入博纳系统了 停留在登录界面
盒子TTL 输入任何命令都是乱码 疑似屏蔽

最后的希望是进博纳 救回盒子系统

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周六 9月 21, 2019 7:09 am

qfnuzlr 写了:
周五 9月 20, 2019 5:29 am
二 猫 写了:
周四 9月 19, 2019 6:48 am
qfnuzlr 写了:
周三 9月 18, 2019 3:40 am
我的刷博纳后 这种情况能不能告知登录用户名和密码 进去系统救回盒子
目前这个日期的盒子 无法进入线刷模式
这个镜像也没有密码,不支持登录,你这个已经root了,不能用U盘或者TF卡刷入吗
目前TTL看到 进入博纳系统了 停留在登录界面
盒子TTL 输入任何命令都是乱码 疑似屏蔽

最后的希望是进博纳 救回盒子系统
这个进不了,进了也不一定能解决你这个问题
BonusCloud.io

qfnuzlr
中学生
帖子: 56
注册时间: 周日 11月 04, 2018 1:38 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 qfnuzlr » 周日 9月 22, 2019 11:36 pm

什么时候 能出博纳系统 适配 咪咕盒子MGV2000 九联 代工

alpchen
中学生
帖子: 74
注册时间: 周二 3月 26, 2019 2:59 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 alpchen » 周二 10月 08, 2019 10:59 am

中兴B860AV2.1插上SD卡,跑完后,显示器变黑屏了,断电,拨出SD卡,重启后,卡在盒子开机画面不动,是哪里有问题?
用U盘跑开放镜像,正常的
是不是没有刷进EMMC

头像
Solomon
新人报道
帖子: 5
注册时间: 周五 11月 16, 2018 11:39 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 Solomon » 周三 1月 01, 2020 2:24 pm

百事通R3300L刷过后可不可以像N1的方法线刷回安卓?认真脸

头像
二 猫
论坛管理员
帖子: 1580
注册时间: 周四 11月 01, 2018 10:34 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 二 猫 » 周五 1月 03, 2020 8:09 am

Solomon 写了:
周三 1月 01, 2020 2:24 pm
百事通R3300L刷过后可不可以像N1的方法线刷回安卓?认真脸
你能找到R3300L的安卓固件就可以应该
BonusCloud.io

1105162862
新人报道
帖子: 7
注册时间: 周六 7月 20, 2019 5:12 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 1105162862 » 周三 3月 25, 2020 6:11 pm

二 猫 写了:
周六 9月 21, 2019 7:09 am
qfnuzlr 写了:
周五 9月 20, 2019 5:29 am
二 猫 写了:
周四 9月 19, 2019 6:48 am


这个镜像也没有密码,不支持登录,你这个已经root了,不能用U盘或者TF卡刷入吗
目前TTL看到 进入博纳系统了 停留在登录界面
盒子TTL 输入任何命令都是乱码 疑似屏蔽

最后的希望是进博纳 救回盒子系统
这个进不了,进了也不一定能解决你这个问题
现在解决了吗我也是这台机器 无网

dywscht
新人报道
帖子: 8
注册时间: 周六 5月 23, 2020 7:04 am

Re: S905L机顶盒刷博纳云定制固件教程(测试百事通R3300L)

帖子 dywscht » 周一 5月 25, 2020 5:24 pm

mgv2000用putty刷机成功后 拔了U盘重启就变成原来机顶盒自带系统 插着U盘才能进博纳云的 用n1那个新建flashemmc也没用

CMCCAdmin
新人报道
帖子: 1
注册时间: 周一 6月 22, 2020 4:02 pm

Re: S905L机顶盒刷博纳云定制固件教程

帖子 CMCCAdmin » 周一 6月 22, 2020 4:05 pm

二 猫 写了:
周一 8月 12, 2019 3:44 am
xiaohai 写了:
周日 8月 11, 2019 7:18 pm
"可以直接进系统像N1那样通过adb进入刷机模式也可以,需要用线刷工具刷入带root的S905L镜像即可,操作方式一模一样。 "

这这个步骤看不明白,是指通过 adb 连接上盒子之后, 在adb shell 里面输入命令 : reboot update 吗 ?
用线刷工具,刷入镜像包
这个线刷工具不是只能刷安卓的么,博纳云的一直解析固件失败

回复